Textile News, Apparel News, RMG News, Fashion Trends
Dyeing, Finishing & Printing

Bluesign® to phase out textile solvents that are carcinogenic, mutagenic or toxic

Textile chemical management specialist Bluesign® Technologies has announced a management and phase-out concept for critical CMR (carcinogenic, mutagenic or toxic to reproduction) solvents.

Bluesign® says it expects to see a significant reduction in the use and emissions of CMR solvents when the concept is fully implemented by its system partners by the end of 2024.

The company already works with its system partner companies to restrict the use of volatile organic compounds (VOCs) for purposes such as polyurethane coating and laminating.

In addition to its existing approach to hazardous chemicals and volatile organic compounds (VOCs), Bluesign® is now introducing a solvent management and phase-out concept for CMR solvents in cooperation with stakeholders.

Figure: Bluesign® to see a significant reduction in the use and emissions of CMR solvents when the concept is fully implemented by its system partners by the end of 2024. Courtesy: Collected

CMR substances are chemical substances of specific concern due to the long-term and serious impact they may have on human health.

These substances can be carcinogenic (having the potential to cause cancer), mutagenic (causing DNA mutations), or toxic for reproduction (affecting the fertility of adults).

The specific solvents of concern are N, N-dimethylformamide (DMFa), N, N-dimethylacetamide, NMP, NEP, and toluene.

The CMR solvent phase-out concept applies to all bluesign®® SYSTEM PARTNER companies manufacturing articles with such solvents (e.g. coaters and laminators).

A single medium-sized coating company uses about 700t of DMF and 200t of toluene annually.

A significant reduction in the use and emissions of CMR solvents can therefore be expected when the concept is implemented by bluesign®® System Partner companies.

In compliance with existing guidelines as well as the CMR solvent concept, which will become the guideline for the next few years, bluesign®® SYSTEM PARTNER companies have full responsibility for non-regrettable substitution of these substances and must switch to less hazardous solvents.

Using water-based solvents is a possible route for substitution.

If for performance reasons the use of a CMR solvent is currently unavoidable and the solvent is not banned by Bluesign®, companies must fulfill one of the following requirements based on the CMR solvent concept:

  • Install an off-gas abatement system with an efficiency for CMR solvent(s) of at least 95% or a TOC concentration in the off-gas of less than 10 mg/m³ (all relevant emission ports)
  • Install a recycling system with an efficiency for CMR solvents of 95% or more

CMR solvent concept implementation has the following deadlines:

  • By the end of 2022, bluesign®® SYSTEM PARTNER companies demonstrate full implementation of the concept or must provide a detailed improvement plan.
  • By the end of 2024 all bluesign®® SYSTEM PARTNER companies must demonstrate full implementation of the concept.

Progress in CMR solvent management will be monitored by Bluesign® through regular on-site assessments and further specific follow-up. Bluesign® will inform on the progress.

“Burton recognizes our responsibility as an outdoor brand to hold our products to the highest levels of sustainability, and to ensure that our suppliers work in ethical and safe environments. As a bluesign®® SYSTEM PARTNER since 2011, Burton trusts the bluesign®® SYSTEM to advance efforts in textile sustainability and chemicals management,” says Ali Kenney, Chief Strategy Officer, Burton Snowboard Inc.

We continuously strive to improve the environmental attributes of our materials. Projects like CMR solvent abatement serve to address the most pressing issues in our supply chain, where chemical sustainability and performance can work in tandem to create safer workspaces and eco-friendly products. We fully endorse this important evolution for the management of solvents by the industry’s best suppliers and the responsible brands who work with them,” Kenney added.

“From the beginning of our system partnership we appreciated that BLUESIGN® focuses not only on wastewater but also on off-gas emissions. Due to the demand for the highest performance levels for our garments and backpacks, we are currently using solvent coated fabrics and are pleased that  BLUESIGN® is now defining a clear set of requirements and timelines for the use of CMR solvents, which we want to substitute as soon as possible,” says Bettina Roth, Head of Quality and CSR Supply Chain at VAUDE.

“The CMR solvent concept creates a good opportunity for the supply chain to change for the good.”

If anyone has any feedback or input regarding the published news, please contact: info@textiletoday.com.bd

Related posts

Matex Bangladesh partners with bluesign®️ as the first chemical manufacturer in Bangladesh

Nurnahar Akter Tania

ZDHC MRSL and bluesign® alignment‍

Textile Today

Archroma confirms ZDHC commitment with first upload of 1020+ products

Textile Today

Latest Publications

View All