Textile News, Apparel News, RMG News, Fashion Trends
Dyeing & Finishing Dyeing, Finishing & Printing Tech updates

CHTC Fong’s to present one-stop sustainable solution in dyeing and finishing at ITMA ASIA+CITME 2018

The CHTC Fong’s Group will present the “one-stop” sustainable solution in dyeing and finishing range of “pre-treatment, dyeing, post-treatment and wastewater treatment” at ITMA ASIA + CITME 2018 in Hall 6, D05 and yarn conditioning and heat setting in Hall 2, E04, National Exhibition and Convention Center, Shanghai, China from 15 to 19 October.

CHTC Fong’s will present a one-stop sustainable solution for dyeing and finishing industry at ITMA ASIA+CITME 2018
Figure 1: CHTC Fong’s will present a one-stop sustainable solution for dyeing and finishing industry at ITMA ASIA+CITME 2018 from 15 to 19 October.

CHTC Fong’s has been committed to the development and manufacturing of dyeing and finishing equipment for more than 50 years. In the past decades, CHTC Fong’s devoted to the development of energy-saving and emission reduction machines and now it becomes the basic conditions for dyeing factories.

Together with its well-known brands: Fong’s, Monforts Fong’s, Xorella, Then, Goller, FWT and Monforts, CHTC Fong’s dedicated in the development of Smart Dyeing and Finishing and join with the customers to build the intelligent dyeing factory.

CHTC FONG’S will exhibit a full line of the most advanced and innovative products and technology including our new products- FONG’S TECWIN High Temperature Dyeing Machine,THEN AIRJETWINAerodynamic High Temperature Dyeing Machine, GOLLER DYEPADDER ECONOMICA Nip-in-Trough, MONFORTS FONG’SMONTEX 6500 StenterFrame Range, MONFORTS FONG’S MONTEX 6500 AIR FILTRATION OMNI Stenter Frame and MONFORTS FONG’S MONFONGS STRAHMHiPer Shrink Astra.

In addition, CHTC Fong’s will also demonstrate the innovative smart dyeing and finishing at the booth, according to an immediate release.

Some major products to be present by CHTC Fong’s at ITMA ASIA+CITME 2018.
Table 1: Some major products to be present by CHTC Fong’s at ITMA ASIA+CITME 2018.

The potential of Industry 4.0, in combination with the drive to reduce waste and minimize raw materials usage, has led to some significant new developments by Monforts.

At this year’s ITMA Asia + CITME, in Hall 6 at booth H6/D05, visitors can learn about the company’s latest Qualitex 800 control system, which along with the Web-UI app, allows the remote visualization of Monforts technologies via smartphones and tablet devices.

“We are already embracing many Industry 4.0 principles in our approach to new machine concepts and the Qualitex 800 has all the intuitive features operators will be familiar with from touchscreen devices,” explains Monforts Vice-President of Sales and Marketing Klaus Heinrichs.

most advanced heat recovery and air filtration technology CHTC Fong’s
Figure 2: most advanced heat recovery and air filtration technology.

“It is making navigation extremely easy for operators, cutting down the time required for becoming familiar with a new system and allowing complete control of all machine parameters,” he continued.

Resource efficiency is being addressed via the latest technologies such as the company’s Eco-Line for denim, based on two key technology advances – the Eco Applicator for minimum application of the selected finishing chemicals and the Thermo Stretch.

In many textile mills globally, the cost of energy for running integrated manufacturing lines – especially those for fabric finishing that can involve numerous sequences of heating and subsequent drying – is now eclipsing the cost of paying people to operate them.

Fong’s Water Recycling System
Figure 3: Fong’s Water Recycling System.

The ability of the Eco Applicator to significantly reduce energy costs has seen it rapidly accepted on the market.

The Monforts Thermo Stretch unit meanwhile carries out the skewing (weft straightening), stretching and drying in a continuous process.

It is making navigation extremely easy for operators, cutting down the time required for becoming familiar with a new system and allowing complete control of all machine parameters.

Klaus Heinrichs, Vice-President of Sales and Marketing, Monforts

“The Eco Line system reduces energy requirements and losses, increases thermal transfer and keeps the drying energy on the textile material longer,” says Monforts Area Sales Director and Head of Product Management for Denim Hans Wroblowski. “As a result energy savings of up to 50% are being achieved.”

Monforts is also the only manufacturer which is able to offer completely integrated coating lines from a single source and at ITMA Asia + CITME 2018, the company’s specialists will be on hand to explain how its latest coating heads are being tailored to drying technology for maximum benefits.

For an unprecedented range of options, Monforts now offers multi-functional coating heads for both its industrial texCoat and All-round coating units. Module options include those for screen printing, magnetic coating and knife coating, either integrated into new lines or retrofitted into existing installations.

“Our system has the shortest fabric path from the coating unit into the stenter and all of these options are available in wider widths,” says the company’s Head of Technical Textiles, Jürgen Hanel.

“Whatever your company’s specialism, we have the technologies and the process knowledge to help you take your business to the next level,” adding this Klaus Heinrichs also said, “We look forward to meeting customers old and new in Shanghai.”

If anyone has any feedback or input regarding the published news, please contact: info@textiletoday.com.bd

Related posts

One-stop supplier of top technology: Santex Rimar shows fabric manufacturers’ favorites at ITMA Asia + CITME 2021

Textile Today

ITMA ASIA + CITME gears up for strong showcase in June 2021

Textile Today

Jakob Müller AG successfully enforced interim injunctions against design patent infringements

Textile Today

Latest Publications

View All