Textile News, Apparel News, RMG News, Fashion Trends
Tech updates

“Innovate for a smart future” – CHTC Fong’s at ITMA ASIA+CITME 2020

CHTC Fong’s International Co. Ltd. (CHTC Fong’s), one of the world-famous textile dyeing and finishing machinery manufacturers is participating in the ITMA ASIA + CITME 2020 from Jun 12th to Jun 16th 2021 at the National Exhibition and Convention Center, Shanghai, China.

CHTC Fong’s, together with its well-known brands: FONG’S, THEN, GOLLER, MONFORTS FONG’S, MONFORTS, and XORELLA, are taking this opportunity to proudly present the “One-Stop” Sustainable Solution in Dyeing and Finishing Range of “pre-treatment, dyeing, post-treatment and waste water treatment” at Hall 6, D04 and yarn conditioning and heat setting at Hall 8, D33.

CHTC Fong’s is dedicated in the expansion of Smart Dyeing & Finishing Solution.

A full line of the most advanced and innovative products and technology will be exhibited including our latest products: FONG’S ENERWIN Energy-saving High Temperature Package Dyeing Machine, THEN AHYBRID Airflow High Temperature Dyeing Machine, GOLLER CYCLONA MODUL Washing Unit for Woven & Knitted Fabric, and MONFORTS FONG’S MONFONGS 888 TWINAIR.

In addition to physical display of our latest products, you could explore the CHTC Fong’s one-stop supply of innovative smart dyeing and finishing line at the booth through VR technology.

CHTC Fong’s understands that the unpredictable challenge of the Coronavirus (COVID-19) has led to the entry restrictions and quarantine requirements for arriving into China. To all our distinguished overseas guests who are eager to find out the latest dyeing and finishing technology in the textile industry, please stay tuned for our upcoming LIVE Streaming Webinar information.

Figure 1: Fong’s high temperature package dyeing machine ENERWIN.

Energy-saving High Temperature Package Dyeing Machine ENERWIN adopts new liquor pathways in the dyeing cycles. These new pathways contribute to the decrease in overall energy and water consumption for package dyeing.

In addition, ENERWIN can be equipped with main pump in lower power configuration when comparing to the previous package dyeing machine model and it further diminishes the energy consumption. Thus ENERWIN empowers your production with a competitive edge over the industry.

Figure 2: Then airflow high temperature dyeing machine AHYBRID.

Revolutionary Airflow High Temperature Dyeing Machine AHYBRID offers versatile operation modes by switching the combinations of multifunctional nozzles, and eventually offers various dyeing applications for the same batch of fabrics in only one single dyeing machine.

Airflow dyeing, hydraulic dyeing, airflow-spray dyeing and hydraulic-spray dyeing can be achieved in one AHYBRID and thus the production effectiveness is greatly enhanced as with the machine, the ranges of application in fabrics and dyeing techniques are broadened.

Figure 3: GOLLER washing unit for woven & knitted fabric CYCLONA MODUL.

By gathering the valuable experiences on the knits; based on the characteristic of the absorption on woven fabrics; and finally GOLLER has developed CYCLONA MODUL, a washing unit which combines the advantages of integrated rotor-drum washing together with the up-down rollers features.

The followings are the three major sections of the new design:

  • The lower section of the unit is equipped with the patented Cyclone rotor as in the Sintensa Cyclone washing unit, and is fitted with the new designate co-axial mechanism, which brings the maximum speed up to 100m/min. By means of the turbulence generated by the Cyclone rotor, the fast moving fabric can be achieved entirely swelled which is ready for washing in a very short period.
  • The upper section of the unit is equipped with several sets of up-down rollers, jockey rollers, and spraying devices, which are installed both under liquor and above the rollers. The fabric will firstly pass through the under liquor turbulence washing zone in the lower section, then it goes through the upper washing section with the combined spraying and squeezing, and it turns back to the lower section for under liquor turbulence washing again. This washing sequence is generating the best possibility of liquor exchange, and extracts the impurity & dirt away from the fabric.
  • The last section is designed with interchangeable intermediate trough and patented inclined-squeezer developed from the family of Sintensa Cyclone. The fabric will effectively be squeezed before leaving the washing zone.

The new CYCLONA MODUL combines multi washing elements in one single unit, thus a shorter range can finally be achieved for utility saving. “Design for customer’s future” is the key of our design concept at GOLLER; the new CYCLONA MODUL has turned over a new page of the open-width washing on woven and knitted fabrics.

Figure 4: Monforts FONG’S stenter frames range MONFONGS 888 TWINAIR.

Advanced chamber German design proven for most homogenous temperature distribution originated from Monforts Germany developed technology

Monfongs 888 Twinair technology is designed based on the Monforts Germany stenter range. This model combines the most recent developed technology to evolve a more advanced energy saving stenter range.

Advanced squeezing roller: The Matex 6000 of this stenter is equipped with our newest high efficiency parallel padders which could lower the pickup in the same time keep the fabric hand-feel. This could lead to less energy to evaporate the water content of fabric after passing through the padders. This lower energy consumption could contribute the textile industry to achieve low carbon release target a step further.

Energy saving design: A sensor is installed at the fabric outlet opening of the last chamber to detect temperature variation and trigger fan speed control of exhausted air. Excessive incoming cold air to the chambers can also be avoided.

This control of exhausted air is also achieved by a photo-electric sensor placing at inlet track. When it detects no fabric at the pins, the system will lower the speed of circulation fans and the fans of exhausted air. This design will avoid unnecessary energy wasting through controlling the air fan speed of exhausted air.

TwinAir: Monforts patented Twin-Air technology allows top and bottom airflow to be regulated separately. It results in drying without marking and the most even temperature possible across the fabric.

Nozzle System CAD Stream: Its “Lay-on-Air” fabric supporting properties in air and with bulking effect through increased volume by its tumbler effect. Attractive cost/benefit ratio with higher evaporation rates. It also provides continuous fabric support even at the chamber transition points.

Qualitex 750 Plus: The new control system Qualitex 750 plus could be adapted to run with OPC protocol. With this system, it still inherits adaptation of current Monfongs software and newest developed device respectively like Q-soft, Monformatic, Mobile appsand Themat, Eco-booster heat recovery device, Dis-O-Clean device and etc. This system gives edged control technology to dry fabric processing and compatible to connecting of most popular central control system in the market.

New Options: By the virtue of new control system, it could adapt to different new options like Oil drop prevention device, Motorized flap door of integrated exhausted duct, Fire extinguisher system etc.

Figure 5: XORELLA XO-Series vacuum conditioning and heat setting machine.

XORELLA’s XO-Series energy saving vacuum conditioning and heat setting machines has been well used in improving the quality of yarn and heat setting of garment.

The Xorella XO-Steaming treatment could even penetrate the textile products for humidification; twist setting, preshrinking the synthetic filament, antistatic, colour fixation of digital printed fabric and heat setting of garment. The latest saturated steam generating system could reduce 30% of connected power loading and save between 15% to 25% energy consumption.

In order to satisfy the requirement of different users, Xorella provides both round and cubical machine and also variety of loading and door opening systems for customer selection. Nowadays, XO-Series machines were used in more than 50 countries in the world.

CHTC Fong’s will build on its sustained success in developing the“One-Stop” Sustainable Solution in Dyeing and Finishing Range and creating the best possible user experience of its products.

To broaden the development of energy-saving and emission reduction dyeing & finishing equipment, CHTC Fong’s will strive and share its dedication to excellence.

If anyone has any feedback or input regarding the published news, please contact: info@textiletoday.com.bd

Related posts

Major Uster innovations ready to go live in ITMA Asia + CITME 2021 in Shanghai

Textile Today

AUTEFA presents innovative solutions for textile industry

Textile Today

CHTC FONG’S to display smart dyeing and finishing solutions at DTG 2019

Textile Today

Latest Publications

View All